How to Tint Windows Faster Without Redoing More Windows

Scrub pad cleaning the side window channel before a window tint install

Shop backdrop: Tint Avenue, San Antonio, TX.

If you tint a door in 15 minutes and then have to do it again, that wasn’t a 15-minute window.

When someone tells me they want to tint windows faster, I want to know where they’re losing time. Are they fighting the tint once it’s on the glass? Walking back to the cart for tools? Recutting a piece that didn’t fit? Those are three different problems. Going faster with the squeegee won’t fix any of them.

Time the whole window, not just the install

Start with a couple of similar front doors. On each one, write down how long you spend on glass prep, cutting, installation, and final inspection. If you have to redo one, keep the clock running and write down why.

Say you spend 5 minutes on prep, 4 on cutting, 6 on the install, and 2 checking the window. That’s 17 minutes. If a crease costs you another 12 minutes to pull the tint, cut a new piece, install it, and check it again, log 29 minutes and one redo. That’s your actual window tint installation time.

Don’t rush your glass prep

Prep can take longer than putting the tint on, and that’s okay. If the seals are dirty, clean them with a scrub pad before you do your final pass on the glass. Then follow the same prep process on every door. If you’re changing the order or skipping steps when you get busy, some windows will come out clean and others won’t. And when you do get dirt under the tint, it’s harder to figure out where it came from.

If you want to get faster, start by cutting out the extra trips to your cart. Don’t cut time out of cleaning the glass.

Fix the step that caused the redo

  • Dirt at the bottom of the glass: Look at the lower seal and the last pass you made before bringing in the tint. If the same area keeps coming back dirty, start there before changing your whole prep routine.
  • A crease before the tint even touches the glass: Pay attention to how you’re picking up and carrying the tint. Clear a path from the peel board to the door and practice that move on a piece you can afford to waste.
  • Constantly reaching for tools: Put the tools you use on every door in the same spots. Have them ready before you pull the liner. You’ll save time without changing how you install.
Window tint tools laid out on a blue towel on the passenger seat
Lay out the tools you’ll need before you pull the liner.

Tools pictured: The orange scrub tool is the GIIO Pico Shark Pro. The dark gray towel is the lint-free Importint Sauce Towel.

Pick the one thing that cost you the most time. Change that one step on the next few similar doors and see if more of them come out clean on the first try.

Pick the method that makes sense for the car

I like bottom loading when I can get the seal out and back in without fighting it. On a door I don’t want to take apart, I’ll two-stage it. When you compare the two, count the time it takes to put everything back together and inspect the window. That time is part of the job.

Watch the order of the steps in this bottom-loading demo. The point isn’t to race through the install. It’s to see what’s already done before the tint goes on.

Here’s my breakdown of two-stage vs. bottom-loading window tint if you want to compare both approaches.

What I’d track on the next few jobs

Vehicle and window · Prep time · Cut time · Install time · Check time · Redo reason and minutes

Keep it simple. If your time drops and your windows still pass the same inspection, you’re getting faster. If your time drops but you’re pulling more tint off, go back and see what changed.

Still working toward your first paid job? Start with how to tell if you’re ready to tint a customer’s car.

Want to train with me? Text me directly at (210) 441-1382 or email me at info@thefilmtrainer.com. Tell me which window keeps slowing you down and what usually goes wrong.


Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.