When Are You Ready to Tint Your First Customer’s Car?

Installer positioning window tint on a front door

You got one front door to come out clean on your own car. Good. Now see if you can do the other door and get the same result. Then come back another day and do both again. That’ll tell you a lot more about whether you’re ready for your first paid window tint job.

If you’re new to window tint installation, I’d start with two front doors on a car you already know how to work on. Here’s what I’d look for before you start charging.

Can you get the same result twice?

On a practice car, do both front doors from start to finish. Use the same order every time: prep the glass, cut the tint, install it, and check your work. Then do the same job again on a different day. When you put the two windows side by side, would you be happy handing the keys back?

If you keep finding dirt near the bottom, go back and look at how you cleaned the seal. If the tint keeps creasing on the way into the car, practice how you’re handling it before you cut another piece. Pay attention to where the problem starts so you know what to change on the next one.

Watch how I prep the glass and handle the tint in this door-window install. Then try the same sequence on both doors and see if your results match.

Installer positioning window tint on a front door
Positioning tint on a front door during an install.

How to check your window tint install

Roll the window down a few inches and look at the top edge in good light. Is the gap even all the way across? Does it match the other door? Then check the glass from a couple of angles for a crease, a hair, or dirt you missed while you were installing.

Top edge of a partially lowered tinted car window
Check where the tint stops just below the top of the glass.

If you’re on the fence about leaving something, have an experienced installer look at it with you. Better yet, have them watch you do a whole window. They might spot where you picked up that dirt before it ever made it to the glass.

Can you finish the job without rushing?

Time yourself from setup to cleanup, including how long it takes to cut and install a new piece if you need a redo. That’s the time you need to plan around when a customer asks how long the job will take.

For that first paid job, quote only what you’ve practiced and leave yourself time to redo a window. Don’t book another car right behind it. If someone asks for a full car and you’re still struggling with rear glass, don’t make their car the one you learn on.

My first paid tint job checklist

  • I can tint both front doors and get a consistent result on different days.
  • I know what to look for at the top edge and across the glass.
  • If I have to redo a window, I know what I’d change on the next try.
  • I know how much time to give myself, including a redo.

If you can check those off, start with a job you’ve practiced. If you keep running into the same issue and can’t figure out where it starts, I can watch you do a whole window and show you what I’d change on your next install.

Want to train with me? Text me directly at (210) 441-1382 or email me at info@thefilmtrainer.com. Tell me what you’re working on and where you’re getting stuck.


Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.